CAMLOCK | Stainless steel camlock coupling for chemical industry | Camlock fitting for oil and gas application | Quick connect camlock coupling for industrial hose | Heavy duty camlock coupling for factory use | Food grade camlock coupling supplier | Chemical resistant camlock fittings | Cam and groove coupling for tanker loading | High pressure camlock coupling supplier | Custom size camlock coupling manufacturer | Camlock coupling Malaysia | Camlock supplier Kuala Lumpur | Camlock fitting supplier Selangor | Camlock coupling supplier Penang | Camlock coupling Johor Bahru | Camlock supplier Klang | Camlock coupling Shah Alam | Camlock supplier Puchong | Camlock coupling Ipoh | Camlock coupling supplier Sabah

Viton Camlock Gasket Malaysia is an industrial green FKM fluorocarbon seal for compatible cam-and-groove couplings. The gasket sits inside the female camlock coupler and helps form a seal against the mating adapter. Correct material, size and condition are essential for reliable service.

Rubber Camlock Gasket Malaysia is a nitrile (Buna-N) replacement seal for compatible cam-and-groove couplings. Installed inside the female coupler, the gasket is compressed by the mating adapter to support a sealed hose connection.

The current product is listed as commercial-grade nitrile / Buna-N.

Camlock Part DP Overview

Camlock Part DP is a dust plug used to close a compatible female camlock coupler when a hose or pipeline connection is not in use. It helps protect the open connection from dirt and debris. The exact size, material, mating series, gasket arrangement and pressure conditions must be confirmed before selection.

Camlock Part DC Overview

Camlock Part DC is a dust cap used to close a compatible male camlock adapter when a hose or pipeline connection is not in use. It helps protect the open adapter from dirt and debris. The exact size, material, mating series, gasket and pressure conditions must be confirmed before selection.

Camlock Part F Overview

Camlock Part F is commonly configured with a male camlock adapter end and a male threaded connection. It connects a compatible female camlock coupler to threaded equipment or pipework. The exact thread standard, size, material, media and pressure conditions must be confirmed before selection.

Camlock Part E Overview

Camlock Part E is commonly configured with a male camlock adapter end and a hose shank. It connects a compatible female camlock coupler to a flexible hose. The exact hose bore, shank profile, attachment method, material, media and pressure conditions must be confirmed before assembly.

Camlock Part D Overview

Camlock Part D is commonly configured with a female camlock coupler and a female threaded connection. It connects a compatible male camlock adapter to threaded equipment or pipework. Confirm the thread standard, camlock series, size, material, gasket, media and pressure before selection.

Camlock Part C Overview

Part C combines a female camlock coupler with a hose shank. Confirm hose bore, mating adapter, material, gasket, pressure and media.

• Materials: Stainless Steel 316, brass, aluminium, polypropylene.
• Sizes: 1/2 to 6 inches.
• Published maximum pressure: 150 psi, subject to exact configuration.

Camlock Coupling Part B is a cam-and-groove connection component offered by Advtech Engineering for compatible industrial transfer systems. Correct selection requires more than the “Part B” name: confirm the mating profile, thread requirement, size, body material, seal, media, pressure, temperature and complete assembly.

Camlock Coupling Part A is a cam-and-groove connection component available from Advtech Engineering for compatible industrial hose, pipe and equipment interfaces. Before ordering, confirm how Part A is shown in the connection drawing, together with the mating half, thread, size, body material, seal, media and operating conditions.