Red Multipurpose Hose 20 Bar

Red Multipurpose Hose 20 Bar is a hardwall industrial hose for conveying selected petroleum-based products where its NBR tube, reinforced construction and red cover match the application. The exact media, pressure, temperature, hose size, end fittings and installation conditions must be confirmed before use.

Red Multipurpose Hose Construction

Published Temperature and Safety Information

• Listed temperature range: -20°C to +80°C
• Published safety factor: 3:1
• Product designation: 20 Bar

These values must be checked against the exact hose size, current manufacturer data and complete assembly. Temperature, surge and connection design may affect allowable service conditions.

Media Compatibility Must Be Confirmed

The existing product information refers generally to petroleum-based products. Provide the full media name, grade, composition, additives, contaminants and current Safety Data Sheet. Do not assume compatibility from the term “multipurpose” alone.

Pressure and Duty-Cycle Review

State normal working pressure, start-up or shut-down surge, pump conditions and whether the duty is continuous or intermittent. The 20 Bar name is not a substitute for confirming the rating of the exact hose and every fitted component.

Hose Size, Length and End Connections

Specify the required bore, overall length, flow duty, fitting type, thread or flange standard, fitting material, seal and orientation. The lowest-rated hose, fitting, coupling, flange, gasket or adapter limits the complete assembly. Advtech’s fabrication service can be discussed after these details are defined.

Routing and Installation Considerations

Confirm the required bend allowance, support, movement and access for inspection. Avoid kinking, twisting, crushing, excessive pull and unsupported hose weight. Protect the hose from incompatible chemicals, sharp edges, external heat and traffic damage.

Inspection and Replacement Criteria

Before use, inspect the cover, fittings and connection areas for cracking, abrasion, softening, blistering, leakage or movement. Agree any pressure or leak test, inspection interval and replacement criteria for the application. Do not use a damaged or unidentified hose.

Information Required for Quotation

• Exact media and current SDS
• Working pressure, surge and duty cycle
• Fluid and ambient temperature range
• Required bore, length and flow duty
• End-connection type, material and drawing
• Routing, movement and handling conditions
• Required testing, inspection and documents

Frequently Asked Questions

Is a multipurpose hose suitable for every oil or fuel?

No. Compatibility depends on the exact formulation, additives, temperature, pressure, hose construction, fittings and manufacturer information.

Does the 20 Bar product name apply to every completed assembly?

Not automatically. Confirm the rating for the exact hose size and the lowest-rated fitting, seal, coupling or adapter in the assembly.

What information should be provided before ordering?

Provide the media and SDS, pressures, temperatures, hose size and length, end connections, routing, duty cycle and required test or documentation.

Request a Multipurpose Hose Review in Malaysia

Contact Advtech Engineering with the operating information above for a hose and connection review. Final suitability remains subject to the exact product, complete assembly and verified manufacturer data.

Safety note: Isolate, depressurise and drain the line safely before inspection or maintenance. Trained personnel should follow approved site procedures.